Hi I need 2 doors hangin and the handles fitted, I have all the materials

I need to replace five doors, including removing the old ones, taking them away and installing new ones.

replacing four existing bedroom doors

Replacing 4 internal doors in my house

Supply and fit internal doors: 6 without glass 2 with glass kitchen/living room & 1 set of double doors in living room Also looking for cost to re...

Hi I need 2 doors hangin and the handles fitted, I have all the materials

I need to replace five doors, including removing the old ones, taking them away and installing new ones.

replacing four existing bedroom doors

Replacing 4 internal doors in my house

Supply and fit internal doors: 6 without glass 2 with glass kitchen/living room & 1 set of double doors in living room Also looking for cost to re...

I have two doors needing to be installed into existing frames. I moved in a few months ago in the previous owners removed the Old doors and did not re...

Re-fit four doors; two bedroom doors, one living room door, one kitchen door. These doors were recently removed during works to decorate and re-floor...

Good afternoon. My name is Patrizio,and I based in Edinburgh. We live in a semi detached house at the moment. I noticed that especially in the wint...

Replace and fit internal bathroom door. Handles etc can be re used. It's a quote only at the moment.

My bedroom door does not close properly, may need to have hinges adjusted or the door plained?

I have two doors needing to be installed into existing frames. I moved in a few months ago in the previous owners removed the Old doors and did not re...

Re-fit four doors; two bedroom doors, one living room door, one kitchen door. These doors were recently removed during works to decorate and re-floor...

Good afternoon. My name is Patrizio,and I based in Edinburgh. We live in a semi detached house at the moment. I noticed that especially in the wint...

Replace and fit internal bathroom door. Handles etc can be re used. It's a quote only at the moment.

My bedroom door does not close properly, may need to have hinges adjusted or the door plained?

Replacing existing door and door frame .This is the main door to a block of 6 flats .The door is quite wide it is wood and a small window within th...

Needing 6/7 door replaced in flat. Need trade person to come and have a look and discuss what is needed and be quited. Need to be done soon as aiming...

Replace 2 internal doors with new ones , a bit of remodelling needs done .

I want a quote for turning my pantry door from an inward swing to outward swing. I want to use the same door.

I have one door needed replaced, new door is 3cm smaller in width so frame may need adjusted to fit.

Replacing existing door and door frame .This is the main door to a block of 6 flats .The door is quite wide it is wood and a small window within th...

Needing 6/7 door replaced in flat. Need trade person to come and have a look and discuss what is needed and be quited. Need to be done soon as aiming...

Replace 2 internal doors with new ones , a bit of remodelling needs done .

I want a quote for turning my pantry door from an inward swing to outward swing. I want to use the same door.

I have one door needed replaced, new door is 3cm smaller in width so frame may need adjusted to fit.

The door to my kitchen/ lounge isn't closing properly, suggesting a problem with a part of the mechanism. This is my first year in a new build propert...

5 doors fitted and old ones taken off.

2 internal doors need trimmed at bottom

I need 5 doors hung, hindges put on them and screws for door handles.

I have 3 doors to put on upstairs I have all the hinges and handles just need someone to put them up

The door to my kitchen/ lounge isn't closing properly, suggesting a problem with a part of the mechanism. This is my first year in a new build propert...

5 doors fitted and old ones taken off.

2 internal doors need trimmed at bottom

I need 5 doors hung, hindges put on them and screws for door handles.

I have 3 doors to put on upstairs I have all the hinges and handles just need someone to put them up