Underfloor heating not

Question

My underfloor heating int working. When I switch it on it’s tripping the electric? Happened all of a sudden. Will it be the control panel ?

Ivaylo · Accepted Answer

Hello. I think there is an electrical short. This means that the base wire connects to the ground wire. If you do not understand what to do, a qualified electrician should. I assume that after switching on the floor heating, the electric stops immediately.If so, you need to call an electrician.

David · Answer

Hi Debbie your electric is over loading you may need to get a new panel get your self election have .a call around get more then one PRICE all the best

Mohebullah · Answer

It can be an electric shock , but unfortunately you can’t do anything from control panel .

Josh · Answer

Is it a wet system or electric system if it’s a wet system could be an actuator pump or yes the control panel but needs diagnosing by a qualified technician

Shero · Answer

In this case If the RCD trips when you switch the Underfloor heating on, you probably have an issue with that device and you should contact an electrician. If the MCB in your distribution board trips when the electric underfloor heating is switched on, you may have an overcurrent or overloading issue so it need to be change if necessary.

Edward · Answer

It is possible it is the control panel, but the fault could be any other device causing the fault associated with the wiring

Underfloor heating not

Follow Us

Cookies

Manage Cookies

Essential cookies

Analytics & Tracking

Advertising