Strip foundations

Question

What are strip foundations and when would these foundations be most commonly used for a brick structure?

Murray · Accepted Answer

Strip foundations are a traditional method of construction. They are usually 600mm wide to allow brick and block construction with an allowance for Cavity wall insulation 
Strip foundations would be a minimum of 1000mm deep depending on soil conditions

Jason · Answer

A strip foundation is a type of shallow foundation that consists of a long and narrow footing that supports a load-bearing wall. It is typically used for small to medium-sized structures that have relatively low loads. Strip foundations distribute the weight of the wall over a large area of soil, reducing the pressure on the underlying soil and ensuring that the structure is stable.

Types of Strip Foundations

There are several types of strip foundations that engineers can use depending on the site conditions, the structure's weight, and the soil type. Some common types of strip foundations include:

Trench Fill Foundations: Trench fill foundations are continuous concrete strips that fill the entire trench excavation. They are typically used in areas where the soil is stable and can support the weight of the structure.

Stepped Foundations: Stepped foundations are similar to trench fill foundations, but they have steps or levels that follow the contours of the ground. The steps reduce the amount of excavation required and make the foundation more suitable for sloping sites.

Pad Foundations: Pad foundations are square or rectangular footings that support columns or piers. They are typically used for small structures that have relatively low loads.

we hope this helps

Regards

Cowley Construction

Derek · Answer

Strip foundations or footings are usually foundations for an extension or conservatory.
Usually 600mm wide by 250mm deep by the length of proposed project.

Iain · Answer

Yes they are the most used foundation when it comes to brick work

Stephen · Answer

Strip foundations 

Consist of trenches dependant upon the circumstances 850mm deep  and 600mm wide dug for a 100mm outer and inner leaf and 100 cavity although note the cavity regulations are changing to 124 
These trenches are filled with the concrete mix of the correct strength to achieve strip foundations

Jagvinder · Answer

Never heard of it strip foundation

Plastering Skimming and Building Service's

Lee · Answer

it normal to have strip footing follow the guys that have given you good insight just follow the plains and building control will advice on day to what you need to do all areas have diffent problems with soil

Strip foundations

Follow Us

Cookies

Manage Cookies

Essential cookies

Analytics & Tracking

Advertising