Pulley cord not pulling down

Question

Pulley cord for bedroom light not pulling down  Cord still on fitting on the ceiling, what could be wrong?

Mohanned · Accepted Answer

Hi 
It is the Mechanism that has been broken due to the age of the part or due to high tension applied, so it need replacing. Thanks

Corneliu · Answer

Hi,

Sounds like the cord got stuck as the switch mechanism got a little overused. It will need replacing. Should not be expensive.

Christopher · Answer

Hi most likely the pull cord has jammed inside the housing sometimes can be fixed usually a replacement pull cord is required

James · Answer

Internals of the pull cord will be broken so a new pull cord is required. They can easily be picked up at a local wholesalers

Anthony · Answer

Faulty mechanism inside pull switch. New pull switch required

Owen · Answer

Internally seized with dust and debris new unit required

Chris · Answer

The pull cord has a spring return mechanism. If you gently pull it down and  slightly stretch the cord (but not too much) then let it spring back in this may re-engage the spring mechanism. If this does not work then a new pull cord is required.

Vinay · Answer

Either switch broken or stuck because of heat. 
Change the switch

Robbie · Answer

The internal switch mechanism is broken. It will need a new fitting

Alan · Answer

The internal mechanism will be defective and will need a new switch

Mark · Answer

Most likely the switch is broken and requires replacing.

Adam · Answer

Hi, just need a replacement pull switch, very simple job. Thanks Adam

Abdul · Answer

Your switch got stuck in the off position otherwise your light will be on all the time 
Must be old there for need replacing. Is unrepairable

Chris · Answer

Mechanism inside the fitting is no longer working,maybe due to age of general wear and tear.
Consult a qualified electrician & replace item in question.

Pulley cord not pulling down

Follow Us

Cookies

Manage Cookies

Essential cookies

Analytics & Tracking

Advertising