Installing Electric cooker

Question

Hello I have probably a stupid question but hopefully someone will help me. So I bought electric cooker but I realised that needs to be installed by electrician, however old one was gas and it was removed before we bought a house and there is no cooker circuit so i this case how much it’s roughly it will cost me to get installed the electric one and is it going to require a lot of work thanks in advance

Ahmet · Accepted Answer

Hi it will cost £100 inc metarial, it will take about 1-2 hrs

Kevin · Answer

It would need a 6 or 10mm cable depending on the cooker cable is about as thick as a large middle finger , this needs to run to your fuse box , so think how would it run hiding it as much as possible Price is depending on cable length etc if your fuse box is not been fitted in the last year adding a new cooker circuit may mean a new consumer unit would be required cost for this is about £650 - £1200 again depending on a few things . A cooker install only would be about £350 -£500

Artur · Answer

Everything depend from your building plan . Cables need to be run from Fuseboard up to cooker - so cost of cables , additional fuse, plastic trunking , and installation can be vary between £200 up to £600

Savy · Answer

Most of the house already have a cooker junction box installed in the kitchen with wiring from the consumer units. If your house has wiring and socket pre installed then you don't need to any extra work done just need the cooker to be connected to the switch. 
If there is no wiring then you have to get the wiring installed first.

Max · Answer

Yes its quite a big job but willingness to decorate and repair and fuseboard distance can change the length of time to complete the works.

Marco · Answer

You did not specify where about in England, Wales or Scotland?
New cooker circuit in London, £350.00

Karol · Answer

Hi, cost of run new dedicated circuit for cooker is depending on the distance between cooker & consumer unit. If you can provide more information then we can try to help you

John · Answer

If someone who has answered can do it for £100 then he can do it!

Kosta · Answer

Hi basically you need to run a new 10mm cable from your DB to your cooker point sw,infact a new breaker with the right Amp .  cuz if it was a gas befor that means you don’t have cooker power so that’s main thing about the cost I prefer to see the place and way of running the cable and distance things like that ,so you get the right quote.

Ahmed · Answer

150 t0 170 with installation and checked that depend on where is there distribution

Installing Electric cooker

Follow Us

Cookies

Manage Cookies

Essential cookies

Analytics & Tracking

Advertising