Builders
Carpenters
Electricians
Flooring Specialists
Gardeners
Handymen
Heating Engineers
Painters & Decorators
Plasterers & Renderers
Plumbers
Roofers
Tilers
myFind Tradespeople, compare up to 3 quotes!
It's FREE and there are no obligations
How it works
Ask a trade
Cost guides
Categories
Hardwire Electric HOB
How much is it usually to hardwire an electric HOB? If any cutting would be required to the counter top(cut out) would you also complete this aswel if it was 1/2 mil out?
Expert Trade Answers
"To hardwire the hob and cut the unit would cost about £150 pounds including all materials? If laminated tops a bit more if granite as you need a special tools etc? It would take about 1.5 hrs to install cheers chris"
Answered on 10th Nov 2024 - Member since Nov 2024 -
report
"Hi this would depend on the power rating of the hob , and to whether you have an outlet with the correct rated cable installed already, and an electrician should be able to widen an existing worktop , so long as it was wood and not marble or granite etc.
Regards
Ray"
Regards
Ray"
Answered on 6th Nov 2024 - Member since Jul 2024 -
report
"I would usually charge £60 if it’s replacing an existing electric hob"
Answered on 8th Nov 2024 - Member since Sep 2022 -
report
"It would depend on the worktop surface material is there an existing circuit and are we just connecting the hob?"
Answered on 4th Nov 2024 - Member since Feb 2024 -
report
"Hi.
I normally charge £50. Making slight adjustment to cut out would not be a problem."
I normally charge £50. Making slight adjustment to cut out would not be a problem."
Answered on 4th Nov 2024 - Member since Oct 2024 -
report
"Hi
It depends on the KWatt of the Hob.
Or is it just connecting a hob to existing Cooker panel again depends on KWatt of the hob but providing it’s below 32amp and it already has a dedicated 32amp supply cost is around £60 depending on location.
If not dedicated supply you would need to have either a 6mm or 10mm cable installed this would be decided by KWatt of the Hob.
ASM Electricsl"
It depends on the KWatt of the Hob.
Or is it just connecting a hob to existing Cooker panel again depends on KWatt of the hob but providing it’s below 32amp and it already has a dedicated 32amp supply cost is around £60 depending on location.
If not dedicated supply you would need to have either a 6mm or 10mm cable installed this would be decided by KWatt of the Hob.
ASM Electricsl"
Answered on 4th Nov 2024 - Member since Jan 2024 -
report
"Depends on work top material. Does it need a new circuit in is it RCD protected"
Answered on 4th Nov 2024 - Member since Apr 2024 -
report
Search other questions
Ask a Trade
Got a question that only a tradesperson can answer? We have thousands of trades ready to answer any question you may have.
Ask your question
Other categories
- Aerial Specialists
- Architects
- Bathroom Specialists
- Bricklayers
- Builders
- Joiners
- Cleaners
- Drainage Specialists
- Driveway Specialists
- Electricians
- Flooring Specialists
- Gardeners
- Handymen
- Heating Engineers
- Kitchen Fitters
- Locksmiths
- Loft Specialists
- Metalworkers
- Painters & Decorators
- Pest Controllers
- Plasterers
- Plumbers
- Removal Companies
- Roofers
- Security Specialists
- Specialists
- Stoneworkers
- Swimming Pool Specialists
- Tilers
- Traditional Craftsman
- Tree Surgeons
- Window Specialists
See all questions
Ask a Trade
Are you looking for advice on a DIY project or have a question for our tradespeople?
We'll email your question to tradespeople who are skilled in your chosen category.
Your question will be made public - please do not include any personal details.
{{ first(ask.errors)[0] }}
Report Content
{{ first(reportForm.errors) }}
Thank you
Your report has been created and will be investigated shortly.
Over 1 million homeowners and over 50,000 tradespeople
use MyJobQuote nationwide each year